Skip to Main Content

Advanced Solutions

 

IN HOUSE MACHINING EQUIPMENT AND CAPABILITY

 

DMG_Mori_NHX_5000_2

DMG MORI NHX 5000

  • Max X-axis travel: 28.7 inch
  • Max Y-axis travel: 28.7 inch
  • Max Z-axis travel: 34.6 inch
  • Pallet load capacity: 1100 lb
DMG_Mori_DMU_65_monoBLOCK

DMG MORI DMU-65 (5-Axis)

  • Max X-axis travel: 28.9 inch
  • Max Y-axis travel: 25.6 inch
  • Max Z-axis travel: 22 inch
  • A-axis rotation: ±120 degree
  • C-axis rotation: 360 degree
  • Pallet load capacity: 2205 lb
Doosan_2600ST_1

2x - DOOSAN SMX 2600ST (9-axis)

  • Max turn diameter: 26 inch
  • Max turn length: 60.6 inch
  • Chuck: 10 inch
  • Left spindle power: 35 hp
  • Left spindle speed: 4000 rpm
  • Right spindle power: 35 hp
  • Right spindle speed: 4000 rpm
  • Milling speed: 12000 rpm
  • Milling power: 35 hp
Doosan_Puma_2600

DOOSAN PUMA 2600

  • Chuck size: 10 inch
  • Max speed: 3500 rpm
  • Power: 29.5 hp
  • Max swing: 18.9 inch
  • Machining length: 31.1 inch
  • Tailstock: Yes 
  • Magazine Bar Feeder: 72 inch
Doosan_Puma_2100SY

DOOSAN PUMA 2100SY (5-axis)

  • Chuck size: 8 inch
  • Turn diameter: 15.9 inch
  • Max turn length: 20.5 Max
  • Max speed: 5000 rpm
  • Power: 29.5 hp
  • Sub spindle speed: 6000 rpm
  • Sub spindle power: 20 hp
  • Sub spindle: 6 inch
Doosan_DNM_650

DOOSAN DNM 650

  • Max X-axis travel: 50 inch
  • Max Y-axis travel: 26.3  inch
  • Max Z-axis travel: 24.6  inch
  • Max table load: 2204.6 lb
  • Quick set-up tooling plate
  • Renishaw probe
Doosan_DNM_500

DOOSAN DNM 500

  • Max X-axis travel: 40.16 inch
  • Max Y-axis travel: 21.26 inch
  • Max Z-axis travel: 20.8  inch
  • Max table load: 2764 lb
OMAX_5555_Jet_Machining_Center_1

OMAX 5555 PRECISION WATER JET MACHINING

  • Work envelope: 55 inch x 55 inch
  • Max thickness: 8 inch
  • Table size: 80 inch x 65 inch
  • Speed: 180 inches/min
  • Linear positional accuracy: ±0.0010 inch
  • Repeatability: ±0.0010 inch
  • Ballbar circularity: ±0.0025 inch
  • Tilt-A-Jet head option available
  • All materials except, Magnesium or Beryllium
Haas_DT2_1

HAAS DT-2 (5-axis)

  • X-Axis travel: 28 inch
  • Y-Axis travel: 16 inch
  • Z-Axis travel: 15.5 inch
  • Spindle nose to table: 21.5 inch 
  • Spindle nose to table: 6 inch min
  • Spindle rating: 15 hp
  • Spindle speed: 10,000 rpm
  • Table: 34 inch (length) x 15 inch (width)
  • Renishaw probe
HAAS_SL30T

HAAS SL30T

  • Power: 30 hp
  • Max speed: 3400 rpm
  • Turning diameter: 17 inch
  • Machining length: 39 inch
  • Swing: 21 inch
  • Tailstock: No
Hardinge_LC_Cobra_42

HARDINGE LC COBRA 42

  • Power: 7.5 hp
  • Max speed: 5000 rpm
  • Turning diameter: 7.75 inch
  • Swing: 21 inch
  • Machining Length: 13.9 inch
  • Tailstock: No
Hardinge_Conquest_VT200_1

HARDINGE VT 200

  • Max turning diameter: 15.75 inch
  • X-Axis travel: 7.94 inch
  • Z-Axis travel 19.88 inch
  • Max swing diameter: 25.5 inch
  • Power: 30 hp
mitsubishi_fa10sm

MITSUBISHI FA10SM EDM

  • Table size: 23.23 inch x 20.224 Inch
  • Max work piece: 31.5 inch x 23.6 inch x 8.4 inch
  • Travel X: 13.78 inch
  • Travel Y: 9.84 inch
  • Travel Z: 8.66 inch
  • Wire Diameter: 0.07 - 0.3 mm

 

Let us know how we can meet your machining requirements:

CONTACT US

 


© 2020 Dynamic Manufacturing. All Rights Reserved.

IATF16949 CERTIFIED

Instagram LinkedIn YouTube
Website design and development by Americaneagle.com | Terms of Use | Site Map
Close